COREXIT
9500 is used to disperse oil spilled on the sea, thereby minimizing its environmental impact.
COREXIT 9500 is a high-performance, biodegradable, low toxicity oil spill dispersant that is effective on a wide range of oils, including the heavier, more weathered oils and emulsified oils. In addition to Corexit 9500, CGA’s Fast Response Vessels may also use Corexit 9527 for limited application.
Aerial Spraying
Provides the most rapid method of applying dispersants to an oil spill and a variety of aircraft can be used for spraying. For aerial spraying the dispersants are applied undiluted. A typical treatment rate is two to ten US gallons per acre. Typical application altitudes of 30 to 50 feet have been used, although higher altitudes may be effective under certain conditions.
Boat Spraying
The dispersants may also be used by boats equipped with spray booms, or fire water cannons.
Handling and Storage
This material can be stored in high density polyethylene, stainless steel, or double epoxy phenolic coated carbon steel containers. The containers should always be capped when not in use to prevent contamination and evaporation. Carbon steel and aluminum are not recommended for long-term storage.
Have questions about dispersants, go here